am/h/s to mGal converter

am/h/sattometre per hour per secondmGalmilligalAcceleration

Free Converter

am/h/s
mGal

Formular
[Value of mGal] = [Value of am/h/s] / 3.5999999999712E+16
[Value of am/h/s] = [Value of mGal] * 3.5999999999712E+16

am/h/s(attometre per hour per second)

An attometer per hour per second (am/h/s) is a derived unit for acceleration, which measures the change in speed or velocity over time. In this unit, attometer (10^-18 meters) is the unit of distance, hour is the unit of time, and second is another unit of time.

In an am/h/s, acceleration is expressed as the change in velocity (attometers per hour) that occurs for each second of time elapsed. This unit is, therefore, essentially expressing the change in velocity (displacement/time) over a period of time.

One am/h/s means that the object's velocity is changing at a rate of one attometer per hour for every second of time that passes. This is a very small acceleration since an attometer is an extremely tiny unit of measurement (1 attometer = 10^-18 meters). It is typically used to express extremely small accelerations in scientific and engineering applications.

MGal(megagal)

In the field of acceleration, the unit MGal (megagal) is used to express the magnitude of acceleration, specifically in relation to Earth's gravity. It is derived from the gal (Galileo), a unit of acceleration named after Galileo Galilei, who is known for his discoveries about the motion of falling bodies.

1 Gal is defined as an acceleration of 1 centimeter per second squared (1 cm/s^2). The MGal (megagal) term represents one million times the acceleration of 1 Gal, so 1 MGal is equal to 1,000,000 Gal or 1,000,000 cm/s^2.

It is important to note that the MGal unit is not a part of the International System of Units (SI), and it is mostly used in geophysics, seismic studies, and related fields to measure accelerations due to the Earth's gravity or processes acting within the Earth's crust.

mGal(milligal)

A milligal (mGal) is a unit of acceleration used in geophysics and geodesy to measure the strength of gravity. It is named after the French scientist Galileo Galilei, who extensively studied the behavior of objects in freefall.

1 mGal is equal to one-thousandth (0.001) of a gal, where 1 gal (galileo) is defined as 1 centimeter per second squared (1 cm/s²). Thus, 1 mGal is equal to 0.001 cm/s² or 1*10⁻⁵ m/s² (1*10⁻² m/s²).

In the field of geophysics, mGal is often used to express small variations in Earth's gravitational field or accelerations due to gravity. These tiny differences in gravity can be associated with factors such as the density of rock beneath Earth's surface or the varying mass distribution of the Earth.

Due to its small magnitude, the mGal unit is suitable for representing these local variations in Earth's gravity, which are often only a small fraction of the standard value of approximately 9.81 meters per second squared (9.81 m/s²).

am/h/s and mGal Conversion Mapping Table
am/h/s mGal
12.777778E-17
25.555556E-17
38.333333E-17
41.111111E-16
51.388889E-16
61.666667E-16
71.944444E-16
82.222222E-16
92.500000E-16
102.777778E-16
205.555556E-16
256.944444E-16
501.388889E-15
1002.777778E-15
2005.555556E-15
2506.944444E-15
5001.388889E-14
10002.777778E-14
20005.555556E-14
25006.944444E-14
50001.388889E-13
100002.777778E-13
mGal am/h/s
13.600000E+16
27.200000E+16
31.080000E+17
41.440000E+17
51.800000E+17
62.160000E+17
72.520000E+17
82.880000E+17
93.240000E+17
103.600000E+17
207.200000E+17
259.000000E+17
501.800000E+18
1003.600000E+18
2007.200000E+18
2509.000000E+18
5001.800000E+19
10003.600000E+19
20007.200000E+19
25009.000000E+19
50001.800000E+20
100003.600000E+20