## MGal to am/min/s converter

MGalmegagalam/min/sattometre per minute per secondAcceleration

##### Free Converter

MGal
am/min/s

Formular
[Value of am/min/s] = [Value of MGal] * 5.99999999988E+23
[Value of MGal] = [Value of am/min/s] / 5.99999999988E+23

##### MGal(megagal)

In the field of acceleration, the unit MGal (megagal) is used to express the magnitude of acceleration, specifically in relation to Earth's gravity. It is derived from the gal (Galileo), a unit of acceleration named after Galileo Galilei, who is known for his discoveries about the motion of falling bodies.

1 Gal is defined as an acceleration of 1 centimeter per second squared (1 cm/s^2). The MGal (megagal) term represents one million times the acceleration of 1 Gal, so 1 MGal is equal to 1,000,000 Gal or 1,000,000 cm/s^2.

It is important to note that the MGal unit is not a part of the International System of Units (SI), and it is mostly used in geophysics, seismic studies, and related fields to measure accelerations due to the Earth's gravity or processes acting within the Earth's crust.

##### mGal(milligal)

A milligal (mGal) is a unit of acceleration used in geophysics and geodesy to measure the strength of gravity. It is named after the French scientist Galileo Galilei, who extensively studied the behavior of objects in freefall.

1 mGal is equal to one-thousandth (0.001) of a gal, where 1 gal (galileo) is defined as 1 centimeter per second squared (1 cm/s²). Thus, 1 mGal is equal to 0.001 cm/s² or 1*10⁻⁵ m/s² (1*10⁻² m/s²).

In the field of geophysics, mGal is often used to express small variations in Earth's gravitational field or accelerations due to gravity. These tiny differences in gravity can be associated with factors such as the density of rock beneath Earth's surface or the varying mass distribution of the Earth.

Due to its small magnitude, the mGal unit is suitable for representing these local variations in Earth's gravity, which are often only a small fraction of the standard value of approximately 9.81 meters per second squared (9.81 m/s²).

##### am/min/s(attometre per minute per second)

In the field of acceleration, attometre per minute per second (am/min/s) is a unit used to measure very small accelerations. An attometre (am) is a unit of length equal to 1x10^-18 meters, which is extremely small. When measuring acceleration, we take the change in speed (velocity) per unit of time.

The unit am/min/s represents the change in speed by attometers per minute (am/min), where the change occurs every second. Mathematically, it can be represented as:

1 am/min/s = 1 attometer / (1 minute * 1 second).

This unit may be applicable in scientific research fields like particle physics, nanoscience, or other contexts where extremely small accelerations need to be measured or observed.

##### MGal and am/min/s Conversion Mapping Table
MGal am/min/s
16.000000E+23
21.200000E+24
31.800000E+24
42.400000E+24
53.000000E+24
63.600000E+24
74.200000E+24
84.800000E+24
95.400000E+24
106.000000E+24
201.200000E+25
251.500000E+25
503.000000E+25
1006.000000E+25
2001.200000E+26
2501.500000E+26
5003.000000E+26
10006.000000E+26
20001.200000E+27
25001.500000E+27
50003.000000E+27
100006.000000E+27
am/min/s MGal
11.666667E-24
23.333333E-24
35.000000E-24
46.666667E-24
58.333333E-24
61.000000E-23
71.166667E-23
81.333333E-23
91.500000E-23
101.666667E-23
203.333333E-23
254.166667E-23
508.333333E-23
1001.666667E-22
2003.333333E-22
2504.166667E-22
5008.333333E-22
10001.666667E-21
20003.333333E-21
25004.166667E-21
50008.333333E-21
100001.666667E-20